EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Demand Controller is actually a highly productive photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technologies, it guarantees optimized Strength conversion and technique security for a wide array of photovoltaic (PV) applications.

Important Characteristics on the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller technology for outstanding solar energy harvesting. Key attributes consist of:

Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Sophisticated MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery daily life.
Liquid crystal display Display screen with real-time details checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Manual to Establishing the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Make sure all factors are incorporated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Confirm the model quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a perfectly-ventilated, dry site near to the battery lender.
Protected the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Charge Controller
Warning: Generally comply with suitable security protocols and ensure the procedure is driven off just before connecting components.

Move one: Link visit here the battery terminals to the demand controller (constructive to optimistic, unfavorable to destructive).
Action two: Connect the photo voltaic panel array to your PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Monitoring and Data Logging
The Tracer AN Series supports real-time checking using the MT50 distant meter.
Information is usually logged via the RS485 interaction port making use of software for instance Solar Station Computer system.
Remote checking is feasible While using the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Problem one: No Energy Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Problem two: Around-Voltage Protection

Validate the solar array’s voltage rating.
Regulate technique parameters if essential.
Challenge three: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations during the menu.
Advantages of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification technology assures:

Greater Effectiveness: Reduced Strength losses throughout conversion.
Increased Reliability: Steady general performance below variable hundreds.
Longer Battery Existence: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is surely an exceptional choice for optimizing solar energy generation and extending battery existence. By following the above set up guide, people can ensure optimum efficiency and technique longevity.