EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Photo voltaic Charge Controller is usually a extremely productive photo voltaic controller made for off-grid photo voltaic units. Depending on multiphase synchronous rectification technology, it ensures optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) apps.

Critical Features from the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technologies for outstanding photo voltaic Electrical power harvesting. Important functions contain:

Multiphase Synchronous Rectification (MSR) for improved Strength conversion.
State-of-the-art MPPT Algorithm with >99% performance.
Dual-Phase Charging for Increased battery lifestyle.
LCD Show with real-time info monitoring.
A number of Load Management Modes which include manual and timer.
Complete Electronic Protections in opposition to overcharging, around-discharging, small circuits, and reverse polarity.
Move-by-Phase Guidebook to Establishing the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all components are bundled: Tracer AN device, temperature sensor, conversation cables, and user guide.
Validate the product range and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Select a effectively-ventilated, dry spot near the battery lender.
Secure the Tracer AN controller using the offered mounting brackets.
Keep correct clearance for heat dissipation.
three. Wiring the Photo voltaic Demand Controller
Caution: Always abide by good security protocols and ensure the system is run off ahead of connecting elements.

Step one: Hook up the battery terminals for the charge controller (favourable to constructive, damaging to unfavorable).
Move two: Link the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if utilizing a direct load connection.
Action four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the controller by connecting the battery initial.
Use Click Here the LCD Show to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using program including Photo voltaic Station Laptop.
Distant monitoring can be done Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Difficulty one: No Power Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection

Validate the solar array’s voltage score.
Adjust process parameters if required.
Difficulty 3: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT settings from the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how guarantees:

Better Efficiency: Diminished Strength losses through conversion.
Enhanced Dependability: Secure efficiency less than variable loads.
Extended Battery Lifestyle: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is really an Outstanding choice for optimizing solar energy generation and lengthening battery lifetime. By following the above setup guideline, people can be certain most performance and technique longevity.