EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is really a extremely economical solar controller made for off-grid photo voltaic techniques. Determined by multiphase synchronous rectification engineering, it assures optimized Electrical power conversion and program security for a variety of photovoltaic (PV) programs.
Important Features in the EPEVER Tracer AN Series Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Charge Controller technologies for excellent solar Electricity harvesting. Key capabilities incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Superior MPPT Algorithm with >ninety nine% efficiency.
Dual-Phase Charging for Increased battery life.
LCD Display with real-time data checking.
Various Load Command Modes together with handbook and timer.
In depth Digital Protections against overcharging, over-discharging, shorter circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model selection and voltage ratings match your solar panel and battery requirements.
2. Mounting the Charge Controller
Find a very well-ventilated, dry spot near the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Preserve appropriate clearance for heat dissipation.
3. Wiring the Solar Cost Controller
Warning: Often comply with suitable basic safety protocols and ensure the system is run off ahead of connecting elements.
Step 1: Join the battery terminals for the demand controller (favourable to constructive, damaging to unfavorable).
Move two: Link the photo voltaic panel array to your PV input terminals.
Step three: Link the load terminals if employing a immediate load connection.
Action four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electric power to the controller by connecting the battery to start with.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, gentle More info Manage.
five. Checking and Info Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port applying application like Photo voltaic Station Computer.
Distant monitoring can be done With all the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Difficulty one: No Electrical power Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Adjust technique parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Steady performance below variable hundreds.
Lengthier Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and process longevity.